AM 150

AM 150 is the smallest Airmaster decentralised ventilation unit, with heat recovery. AM 150 is designed especially for small rooms such as offices seating one or two people, as well as small meeting rooms and group rooms.

Data AM 150
Standard AM 150
  • Bypass
  • Motor driven exhaust air damper
  • Motor driven supply air damper 
  • Countercurrent heat exchanger (PET)
Options for AM 150
  • El-varmeflade/VPH
  • CO2-sensor (indbygget)
  • Electric heating surface/VPH •
    CO2 sensor (built-in) •
    PIR/motion sensor (built-in) •
    Condensate pump
  • Energy meter •
    Wall / Ceiling frame
Throw length

Airmaster’s air handling unit spreads fresh air differently, according to angle of control blades in the inlet opening. This is shown on illustrations, where the blue color indicates the spread pattern of the inlet jet.

Throw length, side view

Throw length, top view

Throw length at 0,2 m/s. Spread pattern is shown for different blade angles at 147 m3/h at 35 B(A).

1. Throw length with 60º blade angle.
2. Throw length with 45º blade angle. (Small inlet diffusor)
3. Throw length with 30º blade angle
.

Regarding adjustment of blade angle, see operator's manual. Standard is 45° with small inlet diffusor.

With AM 150, you get a unit that is particularly suitable for 1–2-people offices and small group rooms in offices, at schools or at institutions. In short: small rooms where a comfortable indoor climate is required, contributing to comfort and well-being

AM 150 is a horizontal wall/ceiling-mounted unit, with the supply and exhaust at the rear. The ventilation unit is produced to the same high quality as Airmaster’s other products, using quality components, EC energy-saving motors, a countercurrent heat exchanger, etc.

With options such as motion sensors and CO2 sensors, it is possible to demand-control the ventilation unit according to how many people are in the room at a given time. The fully automatic control can also be combined with Airmaster Airlinq® Online.

Offering the option of installing the AM 150 on the wall or on a ceiling frame, it is also an obvious choice for modular buildings. It can be fully visible, or you can choose to partially integrate it into the ceiling so that only the lower section is visible. It is possible to pipe the exhaust, making it possible to install the ventilation unit above a diffuse ceiling, or connect the exhaust from an adjoining room.

Examples of applications

  • 1–2-person offices
  • Small meeting rooms and the like
  • Modular buildings
  • Hotel rooms

Ready for a breath of fresh air

At Airmaster, we are “decentral” through and through. We are unrivalled when it comes to creating the best indoor climate and optimal well-being because we take each room and its occupants into account – and because we constantly strive to improve on what we do.

Newsletter